Betöltés...
Kérem várjon...

SILVANA fürdőszobai radiátor, 600x1500mm, 771W, texturált elefántcsont szín (IR158)

Ajánlott fogyasztói ár ÁFÁ-val
249 000 Ft /db
Megtakarítás 0,0 %
Az Ön ára ÁFA nélkül 196 063 Ft /db
Az Ön ára ÁFA-val 249 000 Ft /db
ÁFA 27%

MárkanévSapho
SzériaSILVANA
Rendelési kódIR158
Garancia24 hónap
Súly22,60 kg
Szélesség600.00
Űrtartalom6.40
Teljesítmény771.00
SzínElefántcsont szín
Magasság1500.00
AlapanyagAcél
Méret600x1500 mm
Roztec50.00
PripojeniKombinált fűtés
Bekötés 50 mmAszimmetrikus ( oldalra )
Radiátor kiviteleE-forma
Hőleadási érték75/65/20 °C, ?t 50 K
Csomag tartalma1
Radiátor bekötéseElektromos fűtés
Radiátor bekötéseKözponti fűtés
Radiátor bekötéseKombinált fűtés

Heating element

Recommended connection sets - TWIN, TWIN COMBI, CUBE, COMPACT - see accessories.

The heating rod is not part of the radiator. A suitable type can be found in the accessories.

If the radiator is heated only electrically, it is necessary to buy a ku " plug for the radiator (see accessories).

The unusual design with square profiles enhances the technical elegance of the SILVANA radiator. The radiator can be hung on both sides, so you can choose the left or right installation variant.

Combination of central and electric heating

Electric heating

Central heating

Possibilities of "central" connection of heating ladders

1. Central heating - manual valve

CUBE set COMPACT set Copper fittings ALU fittings Cover rosettes

If you decide to buy a ladder of this type, you need to choose a suitable connection set.

If the heater is to be used only for hot water heating without a thermostatic head, it is necessary to purchase a connection set, eg COMPACT or CUBE (according to the heating design).
The CUBE set is available in chrome, brushed stainless steel or silver.
The COMPACT set is only available in chrome. The COMPACT and CUBE sets do not distinguish between right and left variants.
ADVICE! Holes for pipes in tiles are not always perfectly made, so we recommend purchasing a set of cover rosettes. Cover rosettes are used to cover Cu or Alupex pipes and uncleaned holes in the wall. Cover rosettes are available in chrome or brushed stainless steel.
ATTENTION! Our design valves have a special thread 24-19, and therefore it is necessary to purchase a compression fitting recommended by us for each valve according to the material and diameter of the pipe - copper / alupex.
Compression fittings are available in chrome or brushed stainless steel.


2. Central heating - valve with thermostatic head

TWIN connection Copper fitting ALU fitting Cover rosette

If you decide for the thermostatic variant, we recommend the TWIN version:

The TWIN set is available in chrome or brushed stainless steel.
ADVICE! The TWIN set is available in a right / left variant. The picture above shows the left variant. This means that the hot water supply is on the left, also the thermal head itself points to the left (always when viewed from the front). We recommend selecting the valve so that the head always points in the direction of the horizontal profiles of the radiator and not to the opposite side.
ATTENTION! The already mentioned compression fitting for heating assembly + cover rosettes.
Available color variant of compression fitting - chrome or brushed stainless steel.


3. Combined heating - valve with thermostatic head

Heating rod Copper fitting ALU fitting Cover rosette

If you decide to use the heating for both hot water and electric heating, we recommend the TWIN COMBI connection set + heating rod :

ATTENTION! Again, it is necessary to select the correct variant of the left / right sides, see the information above.
The TWIN COMBI set is available in chrome or brushed stainless steel.
ATTENTION! Compression fitting + cover rosette.
Available color variant of compression fitting - chrome or brushed stainless steel. Cover rosettes are available in chrome or brushed stainless steel.
ADVICE! The heating rod can be retrofitted, but we do not recommend this variant due to the probable need to disassemble the heating ladder and drain the heating circuit. For heating rod selection, see variant 4.
Available color variant of compression fitting chrome or brushed stainless steel. Cover rosettes are available in chrome or brushed stainless steel.


4. Electric heating - with thermostatic heating rod

When choosing electric heating, we offer a wide selection of heating rods - ONE, ONE-D, MOA, KTX, GV ...
ADVICE! The client chooses the heating rod according to his own taste, design and appropriate performance!
ATTENTION! The heating rod must be of adequate power according to the specification of the given heating element or the next lower possible one.

If the heater is heated only electrically, it is necessary to fill this heater with antifreeze heat- resistant anti-corrosion liquid, eg LIKIDO brand . It is also necessary to purchase a plug for radiators.

Loading...