SAPHO shop

Betöltés...

Kérem várjon...

.nojs-msg { width: 50%; margin:20px auto; }

Nagyon sajnáljuk...

a Javascript le van tiltva a böngészőjében, kérjük engedélyezze és frissítse a lapot.

Kosár

Betöltés ..

TWIN csatlakozó készlet radiátorhoz, króm (CP3012)

Ajánlott fogyasztói ár ÁFÁ-val	71 000 Ft /db
Megtakarítás	0,0 %
Az Ön ára ÁFA nélkül	55 906 Ft /db
Az Ön ára ÁFA-val	71 000 Ft /db
ÁFA	27%

Cseh készleten 1 db

Márkanév	Sapho
Széria
Rendelési kód	CP3012
Garancia	24 hónap
Súly	0,94 kg
Szín	Króm
Csomag	1 db
Fűtési Lehetőség	Központi fűtés
Kivitel	Termosztástos, fej bal odladlon; Középső bekötés 50 mm
Jótállás	2 év

TWIN

Design angle valve with thermostatic head designed for radiators with central connection 50mm with internal thread G1 / 2 ". Suitable for radiators Magnifica, Collonna, Altalena, Volga, Elit ... The valves are equipped with sealing O-rings for reliable and quick installation.
This valve cannot be used in combination with an electric heating rod.

color: chrome
connection spacing: 50 mm
corner design
thermostatic head on the left side

ATTENTION!
When ordering the set, it is necessary to order a compression fitting (not included).

The water supply is at the thermostatic head.

The non-return valve is hidden under the decorative cover. It is closed with a hexagonal key. It does not serve to regulate the temperature, only to close the pipes, eg in the case of dismantling the radiator, without the need to drain the heating medium.

Central heating

In the case of central heating, the selection of the connection valves is very important. You can choose between using a manual valve or a valve with a thermostatic head.

Manual valve: the valve control head can be installed on the left/right side regardless of the hot water supply location. The temperatur eis controlled manually.
A valve with a thermostatic head: the integrated thermostat maintains the temperature inside the towel rail. The thermostatic head must be located at the hot water inlet (except MONO ONE).

The connection valves we offer are supplied with a clamping fitting for the most common pipes (O15 mm for copper and O16 mm for Alupex), so there is no need to buy anything else for the connection. For covering the inlet pipes and holes in the wall, we recommend the addition of cover rosettes.