SAPHO shop

Betöltés...

Kérem várjon...

.nojs-msg { width: 50%; margin:20px auto; }

Nagyon sajnáljuk...

a Javascript le van tiltva a böngészőjében, kérjük engedélyezze és frissítse a lapot.

Kosár

Betöltés ..

MIMOSA fürdőszobai radiátor, 370x1500mm, 585W, aluminum, fehér (HL100)

Ajánlott fogyasztói ár ÁFÁ-val	169 000 Ft /db
Megtakarítás	0,0 %
Az Ön ára ÁFA nélkül	133 071 Ft /db
Az Ön ára ÁFA-val	169 000 Ft /db
ÁFA	27%

Márkanév	Sapho
Széria	MIMOSA
Rendelési kód	HL100
Garancia	24 hónap
Súly	11,62 kg
Szín	Fehér
Szélesség	370 mm
Magasság	1500 mm
Csomag	1 db
Forma	Dizájn; I forma
Fűtési Lehetőség	Központi fűtés
Bekötési Távolság	460 mm
Hőmérsékleti Adatok	75/65/20 °C
Kivitel	Törölközőtartó: kiegészítőként (opció)
Méret	370x1500 mm
Űrtartalom	1.54 l
Alapanyag	Aluminium
Teljesítmény	585 W
Jótállás	2 év

The radiator made of aluminum, which is characterized by high heating power, is also environmentally friendly - made from recycled material.

Connecting valves are not included in the package
A heating rod cannot be installed to the radiator
The body can be supplemented with a design towel holder

Advantages of aluminum radiators compared to steel, cast iron radiators and underfloor heating.

SMALLER AMOUNT OF WATER

Aluminum radiators require significantly less water to achieve the same heat output than steel and cast iron radiators.
The same heat output is achieved in a shorter time, even when using a boiler with a lower output.

SAVING TIME FOR HEATING

Aluminum is an ideal material for heat transfer, mainly due to its physical and mechanical properties, various shapes and interesting surfaces can be produced. These features are used not only to transfer heat, but also to save space. The same thermal parameters can therefore be achieved with smaller dimensions than those achieved with steel or cast iron radiators.

SMALLER SPACE

WEIGHT REDUCTION

The biggest advantage of aluminum, which has enabled it to become one of the most widely used materials in various industries, is undoubtedly its weight.
The concept of light alloys is very often associated with aluminum, as it is about 3 times lower than the weight of steel. The properties of aluminum enable heating of rooms with extremely light radiators, the radiator is better to handle and its installation therefore becomes much easier.

BETTER TEMPERATURE FLEXIBILITY

With a lower weight, less water and in a shorter time, aluminum makes it possible to achieve very fast temperature changes when heating a given space. Flexibility, which only aluminum offers, will satisfy all requirements for maximum comfort.

COST REDUCTION UP TO 20% AGAINST UNDERFLOOR HEATING

Long-term studies have shown that the use of aluminum radiators results in significantly greater economic savings than the use of underfloor heating.

SAVING TIME FOR HEATING

The underfloor heating system is much more difficult to adapt to the temperature of the surrounding space in which it is installed. Heat is transferred first to the floor structure and only then does the heat spread to the space of the heated room. This parameter also proves that aluminum radiators are an ideal combination of comfort and energy savings.

EFFECT ON THE ENVIRONMENT

A design radiator can be made from 200 pieces of recycled aluminum cans.
Aluminum can be recycled indefinitely. The production of aluminum from aluminum scrap brings up to 95% energy savings compared to primary aluminum production.

Central heating

In the case of central heating, the selection of the connection valves is very important. You can choose between using a manual valve or a valve with a thermostatic head.

Manual valve: the valve control head can be installed on the left/right side regardless of the hot water supply location. The temperatur eis controlled manually.
A valve with a thermostatic head: the integrated thermostat maintains the temperature inside the towel rail. The thermostatic head must be located at the hot water inlet.

The connection valves we offer are supplied with a clamping fitting for the most common pipes (O15 mm for copper and O16 mm for Alupex), so there is no need to buy anything else for the connection. For covering the inlet pipes and holes in the wall, we recommend the addition of cover rosettes.